Internetseite : www.elesa.com

Dokumente | Einzelheiten

 

M.1066 BM 
M.1066 FM
Tubular handles

Aluminium tube with coat on an epoxy base highly resistant to wear, scratches and chemical agents. Colour metalflake graphite. Back mounting (BM typel or front mounting (FM type).

Fitting center distances
200-250-300 mm
400-500-600 mm

HGFT.   HGFT.PR
HGFT.HT-PR

Special black polyamide technopolymer threaded case. Special polyamide technopolymer window. The window consists of a continuous series of prisms (types PR and HT-PR) which provide a clear and immediate reading of the oil level contained in the tank. 

Threads:BSP
1 / 2-3 / 4-1

I.149
Handles

Black Duroplast.

Dimensions
65-85 mm

HCX/E
Electric column level indicators with AC/DC power supply

Special transparent polyamide technopolymer. The electric column level indicators, in addition to the visual control, generate an electric signal when the oil level drops to a minimum.

Fitting center distances
127 mm

I.701+x
Revolving handles

Special black matte finish high impact strength technopolymer.

Dimensions
20-23 mm

HCX/P
Column level indicotors with protection

Zinc alloy protection, which absorbs all shocks transmitting them directly onto the wall of the machine. Special transparent polyamide technopolymer, that guarantees maxirnum fluid level visibility even from side positions. Visibility and temperature readings magnified by lens effect.

Fitting center distances
127 mm

IR.612 INOX
Fold-away handles

 Special black, matte finish, high impact strength technopolymer. AISI 303 stainless steel metal parts.

Dimensions
56-65-80-90 mm

HCZ.
Column level indicators

 Special transparent polyamide technopolymer. Entirely in transparent 
material: moximum fluid level visibility even from side positions. Visibility magnified by lens effect.

Fitting center distances
76-127 mm

TN.
Plugs

Special black matte finish glass-fibre reinforced technopolymer. Threads metric (pitch 1.5)

M. 10-12-14-16-18-
20-22-25-26-35

BSP 1/ 8-1 / 4-3 / 8-1
2-3 / 4-1

GW 12
Gravity indicator digital-analogue

Use on control spindles with positions ranging from horizontal up to 60° inclined. Special black, matte finish, glass-fibre reinforced technopolymer case. Protection completely sealed. Display provided with 5 figure digital counter and with a red pointer on the graduated dial.

TCE.
Plugs with boxed hexagon

Special black matte finish glass-fibre reinforced technopolymer.

Threads: BPS
3 / 8-1 / 2-3 / 4

DD51
Digital position indicators direct drive

High impact resistant technopolymer case, ultrasonically welded to its support to prevent accidental tampering and dust penetration. Standard colour RAL 2004 orange and RAL

7035 grey. Four figure digital counter. The magnifying window (lens effect), improves the readability. Black oxide steel insert with standar Ø 14 mm H7 tolerance reamed hole.

PREVIOUS